EP Scientific Products. Available in clear or amber borosilicate glass Open top vials are assembled with polypropylene caps with 0.060" or 0.125" PTFE/silicone septa Closed top vials are assembled with polypropylene caps with 0.125" PTFE /silicone septa Included polyethylene dust covers protect injection. Compare this item.
Sep 8, 2022 · Natural PTFE/blue silicone: Best septa choice when temperatures are over 125°C. Natural PTFE/red silicone: High temperature formulated seal with a low bleed.
Aijiren's headspace vial caps are engineered to prevent sample contamination while providing consistent, secure seals. Headspace vial caps are available in a variety of materials including aluminum, bimetal, and steel; headspace vial cap septa are available in PTFE/silicone, molded PTFE/butyl, and high-temperature varieties.
ValuLine F217 & PTFE Lined Polypropylene Caps; Septa & Discs. Polyethylene F217 Foam Disc; PTFE Discs; PTFE/Red Rubber Septa; PTFE/Silicone Septa; Red PTFE/Silicone Septa; Red PTFE/Silicone/Red PTFE Septa; Shrink Bands. Transparent Wet Shrink Bands; White Wet Shrink Bands; Thermoset Phenolic & Urea Caps.030 Solid Polyethylene Lined Phenolic Caps
PTFE/Butyl (Pharma Fix Septa) Aluminum Cap N9306224 PTFE/Red Rubber (red) Aluminum Cap, Star Spring and Septa N9304147 N9302978 PTFE/Silicone (white) Aluminum Cap, Star Spring and Septa N9304146 B4000022 PTFE/Silicone (white) Low Bleed Aluminum, Skived Pressure Relief N9302975 PTFE/Silicone (white) Low Bleed Aluminum, Skived (non-Pressure
The septum is suitable for use with all GL 45 sizes of the DURAN® GL 45 bottles from 100 to 20,000 ml. A liquid tight seal is provided when used in combination with the red PBT GL 45 open topped screw cap. Wide temperature usage range from – 50 °C up to + 180 °C. Autoclavable at 121 °C for 15 minutes. Dry heat sterilizable at up to 180 °C.
Shop a large selection of SGE™ GC Septa: CS products and learn more about SGE GC Septa: CS CS material (PTFE-Coated Silicone); Dia.: 0.59 in. (15mm); CS material
compatibility, effective sealing/resealing and low penetration force make PTFE/silicone septa suitable for all types of chromatographic applications. A thin film of PTFE is laminated to the side of the septum that faces the sample to limit exposure of the elastomer to the solvent. PTFE/Silicone septa are ideal for use in most HPLC and
PTFE/silicone – ST101, ST14. A very pure soft silicone laminated to PTFE. Septum resists coring and is recommended for instruments with fine gauge needles. Also recommended for LC-MS and GC-MS due to high purity.
High leak tightness is achieved through the use of our PTFE coated silicone seal.Septa are available in a variety of materials and thicknesses. PTFE Natural Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR. PTFE/High Performance Rubber is a highly pure
PTFE/Silicone septum is provided with a thin 0.005” PTFE layer laminated to our high purity silicone and slit through the center to provide for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial.
Chemglass. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa. Compare this item.
Rubber septa. Used primarily for routine analysis in gas chromatography. Offers moderate ability to reseal and good chemical inertness. Not recommended for multiple injections or holding samples for further analysis. PTFE is protective layer that once broken exposes rubber to chemical attack. Types of rubber septa.
J.G. Finneran. The Finneran 24 mm septa is mainly used with screw thread closures for tight sealing of the stored sample. It is mainly used in research laboratories or in chemical industries. This septa is made of sturdy PTFE/silicone material which ensures long lasting usage and durability. Compare this item.
A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.