Lot-tested including HPLC and GC Red PTFE/White Silicone/Red PTFE 45 ... Convenience Kits include 100 vials and 100 bonded cap/septum.

Kinesis Short Thread Cap, 9mm, Open Blue Polypropylene, Y Pre-Slit Silicone/Red PTFE Septa; 1000/pk · Ensure septa is not deformed due to overtightening—extends 

C4010-69A, 10-425 BLACK BONDED CAP W/SLITRED PTFE/WHITE SILICONE,100/PK. C4010-88, CLEAR TARGET VIAL KIT,T/S SEPTA,100/PK.

Settings for Alliance HPLC Vials and Low Volume Inserts (LVI) . Aijiren Technology recommends pre-slit PTFE/silicone septa, for venting and accurate sample draw.

Bonded septa to secure and prevent it from falling into the vial during use. The low bleed silicone layer provides excellent resealing abilities, while the PTFE 

Blue polypropylene short screw-thread cap, 6mm center hole, 9mm diameter, with pre-slit red PTFE/white silicone septa, 100/pk, CV1815.

Spec Vials are available with or without graduated marking spots. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed 

Results 1 - 28 of 28 Vial crimp seals with PTFE/silicone/PTFE septa · 27108. seal diam. 11 mm, red PTFE/silicone/red PTFE septum, silver aluminum seal, pkg of 100 ...

Septa are available with two or even three layers of material. PTFE/Silicone septa (T/S) are the most useful for HPLC applications as they have wide chemical 

Screw cap, blue, open top, with PTFE / White silicone septa 100/pk ; Parameters: Products: Screw Cap with Septa ; Contact Dikma: USA. 51 Massier Lane. Foothill 

9mm screw thread caps, septa, and vials are Pre-slit Red PTFE / White Silicone Septa. Glass Insert. Features : ... today for HPLC, GC, LCMS & GCMS.

Septa for Aijiren 9mm Open Top Cap, PTFE/White Silicone, 0.040" thick Blue Open-Top Cap, Bonded Interseal PTFE/Silicone, Slit ...

HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit*. Combi-Kits consist of 100 vials and 100 matching caps 

Certified PLUS (Cert+) 9 mm Screw-Top Vials and Caps with Bonded-In Septa PTFE/Silicone septa (blue/ white). PolyMag Screw Cap,.

PTFE faced silicone liner consist of 0.055" (1.4 mm) of silicone and 0.005" (0.14 mm) of PTFE . Ideal for storage and retrieval of volatile solvents, sensitive