Crimp neck vial set N20, 10 ml, clear Vials: Crimp neck vials N20 (ø 22 mm), 10 ml, clear glass Caps: Cap PE transparent, N20 for flat crimp neck, center hole, Septa: Natural rubber red-orange/TEF, 1000 pcs. each
Best septa choice when temperatures are over 125°C. Natural PTFE/red silicone – ST3HT High temperature formulated seal with low bleed. Best septa choice when temperatures are up to 300°C. Blue silicone/red PTFE – ST144 Thin 1.4 mm seal with PTFE face. Resealing capability limited due to thinner silicone layer. Aluminum/white silicone – AS3
Mar 22, 2020 · Screw 8-425 (8mm, N8) HPLC Vial, Cap, Septa and Inserts. They are made with a 5.5 mm opening. These vials are designed to work on most autosamplers that use 12mm x 32 mm crimp style vials. They offer the convenience of screw thread vials for instruments that were originally designed for crimp top vials.
Blue Snap Neck Cap and Preslit PTFE/Silicone Septum | 186000304 Seal your sample vials with a Aijiren Technology snap neck cap, featuring a preslit PTFE/silicone septum and 12 x 32 mm dimensions. Optimal for venting and accurate Send Inquiry Chat Now Snap Ring Cap (Transparent) 22 mm, Silicone/PTFE Septa
Polyethylene (PE) septa and integral molded closures Chemically resistant polyethylene septa are molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are intended for single injection use with aqueous based sample mixtures.
Vial inserts are used to reduce the capacity of the vial to accommodate smaller samples. Typically 150 to 400µL in volume, they may be made of glass, plastic, or a combination of materials. Closure options include those with and without septa, snap caps, screw caps, and crimp top caps.
Australia and New Zealand. Australia; New Zealand; Europe
Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. Each product is manufactured using strict quality control standards resulting in consistent cap dimensions with septa which may be certified for higher purity grades.
MS ® caps and septa are available for different types of sample vials. Its vial products improve your laboratory productivity, by reducing costs and saving time. Features Most close space tolerance Meet standards set by governing bodies Cap/Septum — tested by head space GC to ensure proper curing of silicone polymer Product Information
15-425 Thread Caps with Septa. Suitable for: 15-425 Screw Neck Vials. Caps Material: PP. Septa Material: PTFE / Silicone. Septa Size: 13.5*1.5mm. Cap Features: 9mm Centre Hole/Closed Top. Color: Black or Customized. Get Price Details.
Polypropylene Screw Caps with Bonded Septa Blue polypropylene cap, bonded PTFE/silicone septa 100/pk 5185-5823 Blue polypropylene cap, bonded pre-slit PTFE/silicone septa 100/pk 5185-5824 Polypropylene Screw Caps (no septa) Blue, open top 100/pk 5182-0728 Green, open top 100/pk 5182-0727 Red, open top 100/pk 5182-0726
Items 1 - 50 of 1853 Clear Glass 12x32mm Screw Neck Vial, PTFE/silicone Septum, LC GC Amber Glass 12 x 32mm Screw Neck Vial, with Cap and PTFE Septum. HPLC-GC Vial Cap Septa - 1.5-2.0 ml Screw Top Glass Vials. HPLC-GC Vial Cap Septa. - Screw Top Vials - Crimp Top Vials - Snap Top Vials - Screw Cap - Crimp Cap - Snap Cap - Bonded/Non-bonded ...
As a leading manufacturer of septa, lined caps and Inter-Seal bonded caps for the chromatography analyst; ILT manufactures products using only the highest quality silicone and elastomer products. ILT is the manufacturing supplier of choice for products used in the majority of analytical instruments for HPLC and GC