10mm Screw Caps and Septa. 10-425 screw thread caps, septa and vials provide a wider opening to reduce potential needle bending/breaking during sampling. The plastic caps used are made of high quality polypropylene to exact manufacturing tolerances and lined in a controlled environment. Available cap colors are black only.

Polyethylene (PE) septa and integral molded closures Chemically resistant polyethylene septa are molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are intended for single injection use with aqueous based sample mixtures.

Mar 22, 2020 · Screw 8-425 (8mm, N8) HPLC Vial, Cap, Septa and Inserts. They are made with a 5.5 mm opening. These vials are designed to work on most autosamplers that use 12mm x 32 mm crimp style vials. They offer the convenience of screw thread vials for instruments that were originally designed for crimp top vials.

9mm 2ml Short Tread HPLC Autosampler Vial 9mm Short Thread Caps with Septa 8-425 2ml Screw Neck HPLC Autosampler Vial Screw Caps with Septa for 8-425 Screw Neck Vial 10-425 Screw Neck 2ml HPLC Autosampler Vial 10-425 Screw Caps with Septa 11mm Crimp Top 2ml Autosampler Vial 11mm Crimp Top Caps with Septa 11mm Snap Ring 2ml Autosampler Vial 11mm Snap Top Caps with Septa 1.5ml Glass High

screw, crimp or snap style –it contains the sample 2 The Cap can be made of aluminum, steel or polymer –it holds the septa 3 The Septum (septa –plural) can be made from PTFE, silicone, rubber, butyl or combination –it acts as a pierceable barrier between sample and atmosphere 3 September 21, 2017 3

Aijiren Tech Sun SRi. open top closures fit all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will be removed Integral septum caps are an economical choice for HPLC applications Bonded septa caps resist dislodging during injection during use of. Compare this item.

Aijiren Tech SureSTART Selection Guide. Answer a few simple questions and our SureSTART Selection Guide will recommend the best septa, cap, and vial for your workflow. You can also enter your current septa, cap, and vial part numbers into our equivalence tool to identify equivalent or better-performing Aijiren Tech SureSTART products.

Screw caps (black phenolic hole cap, for use with 20 or 40 mL vial with 24-400 thread) are available as hole caps for use with sealing septa. Caps are offered in phenolic resin. Phenolic hole caps can withstand a maximum temperature of 149C. Related Products: Phenolic Caps. Compare this item.

Septa for Wide Opening Screw Caps Ivory, PTFE/red silicone 100/pk 5182-0731 Red, PTFE/white silicone/red PTFE 100/pk 5182-0729 Blue, pre-slit PTFE/white silicone 100/pk 5183-2074 Red, PTFE/white silicone 100/pk Screw Caps and Septa for 6 mL Vials Screw caps, 16 mm 100/pk 9301-1379 PTFE/silicone septa, 16 mm 100/pk

Our screw vials and vial screw caps are designed for both HPLC and GC instrument platforms across a wide variety of applications, including pharmaceutical, environmental, energy and fuels, forensics, materials science, biopharmaceutical, proteomics, and metabolomics. The 2 mL screw top vial is recommended for sample matrix that is not too volatile.

Screw Caps with Septa for 8-425 Screw Neck Vial Suitable for: 8-425 Screw Vials Caps Material: polypropylene Septa Material: PTFE / Silicone Septa Size: 8*1.5mm Cap Features: 5.5mm Centre Hole or Closed Top Color: Black, White or Customized Send Inquiry Chat Now TAGS: 8-425-screw-vial vial-cap screw-cap pp-cap hplc-vial-caps screw-vial

Meet your certification and documentation needs with our Level 3 Aijiren Tech™ SureSTART™ HPLC and GC Certified Screw Vial and Cap Kits. Select Level 3 products for ultimate performance and sensitivity from your methods, while maintaining the highest levels of sample security and integrity. Choose from a variety of kits containing

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.

PTFE septa cap for screw vials-Aijiren HPLC Vials. Septa Cap Vial at Thomas Scientific a 0.125” septa Borosilicate glass vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so