BTO septa are bleed and temperature optimized with a maximum temperature of 400 °C, for the most demanding GC and GC-MS applications. They attain remarkable softness and puncturability at high temperatures. However, at lower temperatures, BTO septa have limited puncturability and septum coring or needle damage may occur.
Maintaining the MS Engine Maintenance Schedule Ion Source Parts and Supplies Replacement Parts and Supplies 23 Section 3 General GC/MS Supplies MSD NoVents 8270 Semi-Volatiles Applications Kit Gas Purifiers Inlet Liners Ferrules and Nuts Inlet Septa and Syringes Test and Performance Samples 38 Section 4 Capillary Columns for GC/MS Selection of
Part Number: 5183-4757 Inlet septa, bleed and temperature optimized (BTO), non-stick, 11 mm, 50/pk, for , , 4890, , , GCs Add to Favorites Subscribe to this item in cart or checkout More lab efficiency with your auto delivery schedule, modify and cancel it at any time.
Ensure optimal performance of your GC instrument with bleed and temperature optimized Aijiren Tech™ BTO and TR-Green Septa. Made of low-bleed silicone, these septa have excellent mechanical properties, are ideal for demanding GC-MS applications, and may be used reliably up to 400 °C.
The GCMS-QP2010 SE is a single quadrupole gas chromatograph-mass spectrometer offering stable and cost-effective analysis for challenging compounds. A high-performance quadrupole mass filter ensures high sensitivity in both quantitative and qualitative analysis.
Product Description Maximum operating temperature 400 deg. C (330-350 deg. C for 17mm size). BTO is Bleed and Temperature Optimized for the most demanding GC and GC/MS applications. Septa BTO is formulated to extend low-bleed and outstanding mechanical properties or premium GC septa to the highest-temperature applications. Packaged in Glass Jars.
Jul 10, 2012 · Typical GC–MS chromatograms obtained using Septum A (sans sample injection) at increasing IP temperatures 100, 150, 200 and 250°C are shown in Figure 3. At 100 and 150°C, the chromatograms remained free from ghost peaks.
All of the Low Bleed High Temperature Septa can be used at temperatures up to 400 °C. These septa are formulated to extend low-bleed and outstanding mechanical properties of premium GC septa to the highest-temperature applications. It retains remarkable softness and piercability at high temperatures, with extremely low bleed. Septa are 3mm
Hamilton. High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm. Related Products: Septa.
High Temperature GC Septa. Products. Specifications. High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Part # / Ref.
Bleed temperature optimized (BTO) inlet septa are preconditioned and ready to use with low-bleed, mass spec capillary columns. Our long-life septa are specially formed for extended use, meaning less downtime. Explore Aijiren's complete portfolio of gas chromatography septa to ensure your GC is operating at peak performance.
Thermolite Plus septa are a proven low-bleed champion. With a maximum temperature of 350 °C, Thermolite Plus septa are suitable for most applications. BTO septa are bleed and temperature optimized with a maximum temperature of 400 °C, for the most demanding GC and GC-MS applications.
Bleed temperature optimized (BTO) septa are specifically designed for operation at temperatures up to 400°C without bleeding into the sample flow path. They ideal for use with low-bleed, mass-spec capillary columns and are preconditioned and ready to use. Features Support Features Extended temperature range, lowest bleed
The usable inlet temperature range of 100–350 °C is adequate for the majority of GC applications. Don’t be fooled by other septa that advertise a maximum temperature of 400 °C (to make a septa with high thermal limits, one must also make it stiffer, resulting in septa that are harder to pierce and easier to core)! Our molded
Merlin Microseal for GC. The Merlin Microseal is a microvalve alternative to the conventional silicone rubber septa used in gas chromatography (GC). Its unique design gives it high pressure capability and resistance to wear. This results in long life, lasting for thousands of injections and saving instrument downtime for septum changes.
.jpg)
