Aijiren Technology offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black phenolic 12 x 32mm Screw neck Cap 100/pkg. Part Number: WAT058875.

Silicone rubber septa High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography applications. Types of silicone rubber septa PTFE/silicone – ST1, ST15, ST18, ST2

9mm screw thread cap, black polypropylene, silicone/PTFE septa, slitted, 60 shore, 1.0mm thick, 100/pack: Color: Black: Material: Polypropylene: Septum: Silicone/PTFE, Slitted: Thickness (Metric) 1.0 mm: Type: Screw: Closure Size: 9 mm: For Use With (Equipment) 9 mm Glass Screw Top Vials (Routine Range) Unit Size: Pack of 100

Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick

2 mL Screw Top Vials & Caps Part Number: 5185-5863. Cap, screw, blue, certified, PTFE/white silicone septa, 500/pk. Cap size: 12 mm Add to Favorites

Vial septa are available in a variety of materials. Septa, PTFE/silicone/PTFE (septum diam. × thickness 11 mm × 0.040 in.) are sized to fit 4 mL screw cap vials. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes. Packaging 100 ea Safety Information Storage Class Code

Aijiren Tech™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. Choose from Aijiren Tech™, Aijiren Tech™ National™, and Aijiren Tech™ Chromacol™ brands. Limited warranty period: Subject to all warranty requirements and

Some wide opening plastic vials have a glass flanged insert molded to the inside so ample only comes in contact with high-quality glass vial insert and cap septum as an alternative to polypropylene only Aijiren 12 x 32 mm wide opening polypropylene vials are most popular for economical and effective micro-sampling

Volume: 2 mL Size: 12 x 32 mm I.D.: 11 mm Finish: Crimp Top Cap with Closure Kit Description: Clear glass PTFE/Silicone septa with aluminum cap Compare this item 2 mL, 9 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure-Kit PerkinElmer Always have enough vials and closures readily available for your analysis.

Septa cap, screw type– ProSciTech. Septa are fashioned from PTFE /silicone rubber; materials which are inert to most chemicals, tolerate extreme cold and high heat, and may be pierced with syringe needles many times. These products are common HPLC and GC Consumables.

Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa.

Our precleaned, Type 1 borosilicate clear or amber glass vials are washed in non-phosphate detergent, rinsed three times with tap water, and rinsed with ASTM Type-1 organic-free water to remove detergent. Post cleaning, vials are assembled with PTFE/silicone septa and open-top polypropylene caps.

Description: Septa for 8-425 screw thread caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. ,66011-188PK,66011-188CS,69400-090CS,66030-970PK,66030-970CS,72720-109CS

PTFE/Silicone septa are formulated for different hardness (durometer) meeting requirements of various needle types. Formulations offering highly consistent performance, lowest background/blank value, and good chemical compatibility, effective sealing/resealing and low penetration force make PTFE/silicone septa suitable for all types of

Autosampler Vials for HPLC & GC Product Details Product Details Features Tools Literature Features 40% larger opening than standard opening vials Uniformly flat bottom ensures compatibility with inserts Optional ceramic write-on spot on the barrel of the snap vial Compatible with any 12 mm snap or 11 crimp cap