Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.
A pre-slit PTFE/silicone septum may be the ideal choice for improving autosampler reproducibility. PTFE/red rubber: PTFE/red rubber septa are a popular and affordable option for standard gas chromatography uses. These septa provide moderate resealing capabilities and high chemical inertness.
Septa. A wide range of serrated and non-serrated septa, and sleeve stoppers are available for use as temporary closures for glassware joints, tubes, bottles, NMR tubes, ampules, and cannulation techniques in air-sensitive chemistry. To protect your valuable contents in the vessels or containers from the atmosphere, our range of septa provide
Vial septa are available in a variety of materials. Septa, tan PTFE/silicone (diam. x thickness 8 mm x 1.5 mm) are sized to fit screw top vials. They are suitable for use with most organics (until pierced) and are not recommended for use with chlorosilanes. Compare this item.
Septa, PTFE/silicone/PTFE: Inquiry: red PTFE/silicone/red PTFE, diam. × thickness 9 mm × 1.0 mm, pkg of 100 ea: Septa, PTFE/Silicone: Inquiry: red PTFE/white silicone, diam. 12 mm, pkg of 100 ea: Septa, PTFE/red rubber, pkg 100: Inquiry: PTFE/red rubber, diam. × thickness 8 mm × 0.050 in., for use with screw cap, 8-425: Septa, Blue PTFE
Ensure optimal performance of your GC instrument with bleed and temperature optimized Aijiren Tech™ BTO and TR-Green Septa. Made of low-bleed silicone, these septa have excellent mechanical properties, are ideal for demanding GC-MS applications, and may be used reliably up to 400 °C.
Our product range includes a wide range of High Temperature Silicon Septa, 18 MM Screw Type PTFE Silicon Septa, 20MM Blue Colour Septa, 20 MM PTFE Septa & Aluminium Cap, 2 Ml Slit Type Septa With Blue Cap and Silicon Rubber Septa. High Temperature Silicon Septa. Ask Price. 18 MM Screw Type PTFE Silicon Septa. ₹ 20/ Piece. 20MM Blue Colour Septa.
warmed to room temperature. To prevent breakage, turn the stopcock as the apparatus warms. An all glass stopcock is an option. However, solvents used for our reagents will slowly dissolve most stopcock greases. When this is a concern, a PTFE-clad stopcock may be substituted. Given the expense and the limited lifetime of a PTFE-clad glass plug, it
The thermal stability of FFKM is much higher than that of fluorocarbon elastomers that contain hydrogen in their structure. For example, the long-term maximum use temperature of FFKM is 315°C, while the long-term maximum use temperature of fluoroelastomers (FKM) is 215°C. Figure 1. Operating temperature range of fluoroelastomers [1]
Aijiren's headspace vial caps are engineered to prevent sample contamination while providing consistent, secure seals. Headspace vial caps are available in a variety of materials including aluminum, bimetal, and steel; headspace vial cap septa are available in PTFE/silicone, molded PTFE/butyl, and high-temperature varieties.
Larger opening provides increased target area for needle penetration. Available in a variety of colors for easy sample identification. Specifications: Size: 11mm Color: Blue Septa: Clear Ptfe Or Red Rubber Case Quantity: 1000. Compare this item.
High Temperature Septa is made of preconditioned PTFE/silicone rubber and is 3.175 mm (0.125 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 212° C. Preconditioned PTFE/silicone rubber septa, 3.175 mm. Compare this item.
High performance septa Thin PTFE PTFE/Silicone* PTFE/Silicone/PTFE* PTFE/Red rubber Flouroelastomer Butyl Temperature range 40 °C to 300 °C** Up to 260 °C –40 °C to 200 °C –40 °C to 200 °C –40 °C to 90 °C –40 °C to 260 °C –50 °C to 150 °C Use for multiple injections No No Yes Yes No No No Price More expensive Very economical
Accessory Product Data Sheet Septum Selection Guide 411 Madrid Avenue Torrance, CA 90501 Tel: 310-212-0555 Fax: 310-328-7768 www.phenomenex.com
Polyethylene (LDPE and HDPE) Resistance Chart by Chemical. The chemical compatibility of LDPE and HDPE on this chart is tested at 20°C: and 50°C: for 7 days and 30 days (if applicable) with constant exposure. LDPE & HDPE resistance listed by chemical. 1.4-dioxane. LDPE / HDPE at 20°C: little or no damage after 30 days.