For applications involving automated transport of vials, magnetic caps are recommended. The cap liner or septa is the part of the cap which establishes a tight seal with the vial. Liners and septa can be laminated with PTFE on one or both sides, which results in high chemical resistance and a nearly inert barrier between sample and septa material.

PTFE/ High-performance red rubber septa -40 +110 -40 +230 PTFE/Silicone septa: (T/S) -60 +200 -76 +392 PTFE/Silicone/PTFE septa: (T/S/T)* -60 +200 -76 +392 PTFE septa* -200 +250 -328 +482 Butyl/Chlorobutyl/Bromobutyl stopper or septa -20 +125 -4 +257 Gray PTFE/Red rubber -40 +120 -40 +248 PTFE/White silicone purepack septa -60 +200 -76 +392

Mar 31, 2022 · PTFE/rubber septa. PTFE/Red Rubber Septa have: 1. strong solvent resistance, 2. resealing properties, 3. and are coring resistant. When you need a PTFE barrier, they are the most cost-effective option. Until the initial puncture, the PTFE face increases solvent compatibility. Temperature stability chart for PTFE/rubber septa:

Selecting the Correct Septa. It's vital to choose the right septa for your application. The wrong septa can compromise the accuracy of your results and reduce the lifespan of your supplies (increasing overall costs). The below chart shows some common septa materials along with their compatibilities, incompatibilities, and resealability.

PTFE/High Performance Rubber is a highly pure synthetic red rubber septum that provides a reduced background level for specific GC applications, employing sensitive detectors such as ECD or NPD. PTFE/Silicone Septa (T/S) has high-quality, low background/blank value, 100% synthetic pure silicone septa.

the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.

Both types of silicone and butyl rubber septa have a PTFE barrier layer which faces the sample, which reduces the contact between the sample and the silicone and butyl rubber. Before the PTFE layer is punctured, the chemical compatibility properties of the PTFE will

On the other hand, butyl rubber–PTFE septa are mechanically hard and more resistant to the absorption of the constituents of a sample, and it is stable up to 130°C (12, 14). Kolb et al. showed that in using silicone–PTFE rubber septa, 69% of acetone and 89% of dichloromethane were lost, while in butyl–PTFE rubber septa, the losses were

Stoppers, Septum and Closures- Chemglass Life Sciences. 1-800-843-1794. Advanced Search. My account. My Favorites. My Cart 0 ITEM (S) Checkout. Log in. About Us.

Molded Septa are manufactured from high quality, low bleed material that uses the same exclusive LB-2 rubber formulation chromatographers are accustomed to using. Design. Solid Disc. Type. Septa. For Use With (Equipment) Low Bleed GC-MS Columns. Temperature (Metric) Max. 350°C.

Bottle Septa. Septa for bottles provide an airtight seal for bottles that prevents environmental contaminants but allows for the removal of the bottle’s contents by piercing with sharp needles. Septa bottle caps are generally available for open-top and screw caps and allow for aseptic syringe dispensing, as well as the addition of materials.

Thermogreen ® Injector Septa, extremely low bleed over a wide range of inlet temperatures -100 to 350 °C. Easier needle penetration and high puncture tolerance make this septum ideal for autosamplers. This septum is already conditioned and ready to use. Compare this item.

PTFE/Butyl (Pharma Fix Septa) Aluminum Cap N9306224 PTFE/Red Rubber (red) Aluminum Cap, Star Spring and Septa N9304147 N9302978 PTFE/Silicone (white) Aluminum Cap, Star Spring and Septa N9304146 B4000022 PTFE/Silicone (white) Low Bleed Aluminum, Skived Pressure Relief N9302975 PTFE/Silicone (white) Low Bleed Aluminum, Skived (non-Pressure

Sample Vial Caps&Septa. Red PTFE/White silicone septa + Aluminium cap with hole, for 2ml crimp top vial. 100 (pcs) $16.00. + -. LBSV140CSS. Sample Vial Caps&Septa. Nature PTFE/Nature silicone septa + Black screw cap with hole, for 20ml/30ml/40ml/60ml 24-400 screw top vial.

Crimp top vial convenience kit with PTFE/red rubber septa 27239 volume 2 mL, clear glass vial, vial O.D. × H × I.D. 12 mm × 32 mm × 6 mm, silver aluminum seal, PTFE/red rubber aluminum seal, pkg of 100 ea