Septa. Septa are available in a variety of materials and thicknesses. PTFE Natural Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR. PTFE/High Performance Rubber is a highly pure synthetic red rubber septum
A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.
Accessory Product Data Sheet Septum Selection Guide 411 Madrid Avenue Torrance, CA 90501 Tel: 310-212-0555 Fax: 310-328-7768 www.phenomenex.com
Materials commonly used for vials include glass, polypropylene and TPX. Materials commonly used for caps include polypropylene, low density and high density polyethylene, and urea resin. Materials commonly used for septa include PTFE, silicone, natural red rubber, butyl rubber, Viton, polypropylene and polyethylene.
Chemglass. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa. Compare this item.
the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a
100 µL Reacti-Vial Small Reaction Vial, 1.5 mL Screw Cap Septum Vial (1) 13-425 Screw Cap (1) 14 mL Screw Cap Septum Vial, 15 mL (0.5 oz.) Screw Cap Bottle (1)
Septa for use with general chromatography vials, liquid injection 2-056 PTFE/Natural Red Rubber PTFE Natural Red Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR.
HS blank chromatograms from PTFE/silicone headspace septa from several competitors with High Performance septa. As shown in the figure, the High Performance septa provided low HS chromatographic background at 300 °C. 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 Supplier 3 Thermaseal HS septa Claimed can be used up to 300 °C
PTFE/Silicone Vial Kit, Snap, µVial i3 (Qsert), Clear w/ Patch + PTFE/Silicone, preSlit 100/pk AR0-9671-12 AR0-9672-12 1000/pk AR0-9671-13 AR0-9672-13 See page 32 for specialty vials product details. Snap-Top Snap-Top Vial Products Phenomenex l WEB: www.phenomenex.com
Blue Screw Caps, PTFE/silicone/PTFE septa : 100/pk : 5182-0724: Green Screw Caps, PTFE/silicone/PTFE septa : 100/pk : 5182-0725: Red Screw Caps, PTFE/silicone/PTFE septa : 100/pk : : Blue Screw Caps, pre-slit PTFE/silicone septa : 100/pk : 5183-2077: Green Screw Caps, pre-slit PTFE/silicone septa : 100/pk : 5183-2078
Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk. As a part of Aijiren Technology’ wide selection of vials, caps, and other sample accessories, this blue polyethylene screw cap is compatible with a range of vials and other products. Screw caps are designed in consideration with other vial parts in order to achieve high-performance
Vials, open-top screw cap, 2 mL large opening with closures, unassembled convenience packs volume 2 mL, clear glass vial, thread for 10-425, black polypropylene cap, PTFE/silicone septa, pkg of × 100 ea; find Supelco-29118U MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
.jpg)
