Ideal for use with open-top caps to access container contents with a syringe. Highly chemically-resistant PTFE facing maintains integrity of content. Silicone rubber backing allows repeated puncturing through the seal. Recommended for use in all autosamplers using screw thread vials.

the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a

Silicone rubber septa. High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography applications.

Jul 11, 2023 · Pre-slit PTFE/Silicone Septa generally do not require any special handling precautions beyond standard laboratory practices. However, it is recommended to follow the manufacturer's instructions

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.

The Finneran 24 mm septa is mainly used with screw thread closures for tight sealing of the stored sample. It is mainly used in research laboratories or in chemical industries. This septa is made of sturdy PTFE/silicone material which ensures long lasting usage and durability. Compare this item.

Aijiren Technology offers a selection of cap, septum, and assembled cap/septum for various vial sizes. The range of septum material is limited to PTFE, silicone / PTFE, and polyethylene septumless caps. Black, 12 x 32mm Snap Neck Cap and PTFE Septum, 100/pkg. Part Number: 186002645.

Narrow-mouth septa bottles are available in clear or amber Type III glass equipped with a 0.045 in. thick blue PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so septa can be removed

Catalog number: C4015-10. For use with 13-425 threaded caps or 13mm Snap/Crimp Caps, Aijiren Tech™ 13mm Septa are available in PTFE/ Red Rubber, PTFE/Silicone or Red PTFE/White Silicone/Red PTFE to suit a variety of applications. Limited warranty period: Subject to all warranty requirements and exclusions set out in our Terms and

Accessory Product Data Sheet Septum Selection Guide 411 Madrid Avenue Torrance, CA 90501 Tel: 310-212-0555 Fax: 310-328-7768 www.phenomenex.com

Mar 31, 2022 · PTFE/silicone septa. PTFE/Silicone is an ideal choice for analyzing volatile organic chemicals. These analyses happen at low concentrations or during operation at higher conditioning temperatures. Store PTFE/Silicone septa in a glass Purepak jar to ensure: 1. minimal background, 2. low permeability, 3. and the best performance of any headspace

black polypropylene hole cap, thread for 8-425, PTFE/silicone, Top Hat (septa and closure designed to fit together tightly), for use with 2 mL vial, 4.6 mm opening, pkg of 100 ea. Expand. Hide. 27262. black polypropylene hole cap, thread for 8-425, PTFE/silicone, septum thickness 1.5 mm, for use with 2 mL vial (standard opening), pkg of 100 ea.

Jun 12, 2023 · Yes, Pre-slit PTFE/Silicone Septa are generally compatible with automated sample handling systems commonly used in chromatography, facilitating efficient and reliable sample analysis. What is the recommended septa thickness for specific sample types (liquid, solid, gas)?

a barrier (usually PTFE) and one to allow for resealing (usually silicone) • Tri-layer (also known as a sandwich septum): Still made from two distinct materials – usually silicone surrounded on both sides by PTFE Table 1. Septa chemical compatibility. PTFE/Silicone/PTFE* PTFE/Red rubber Fluoroelas tomer PTFE/Butyl