Screw caps & septa only, no vials. Not recommended for HPLC autosamplers. Polypropylene cap with red rubber/PTFE beige septum, 45° shore A, 1,0mm.

Autosampler vial septa, 13 mm for use with 13-425 threaded caps or 13 mm snap/crimp caps.Septa are available in a variety of materials and thicknesses. PTFE 

Sample Vial Caps&Septa, Nature PTFE/Nature silicone septa + Black screw cap without hole, for 20ml/30ml/40ml/60ml 24-400 screw top vial ; Septum Cleanliness 

High quality HPLC vials for all brands on the market. Amber Glass 20ml + Black Screw Cap, PTFE/Silicone Septa. PS200424ABL100 ...

open top closures fit all SUN-SRi 13-425 screw thread vials Pre-assembled septa allows for vacuum release where more than half of vial contents will 

Crimp, PTFE/Silicone, silver HPLC and LC-MS tested and certified ... Certified PLUS (Cert+) 9 mm Screw-Top Vials and Caps with Bonded-In Septa.

Results 1 - 28 of 28 Short thread screw cap, 9 mm thread, with liner · 854161. blue polypropylene cap, PTFE/red rubber septum, septum diam. × thickness 9 mm × 1.0 ...

Qualyvials 4 with screw caps and septa are suitable for for "WISP 48" autosampler from Aijiren Technology. They are also available with solid screw caps and rubber/PTFE 

Screw caps PTFE/Silicone septa (pre slit) - Elsichrom the HPLC Specialist - ELSICHROM specializes in marketing second hand HPLC and other analytical 

Vial Kit: 2mL Clear Glass Vial, 9-425 Blue Polypropylene Screw Cap with 0.040" Bonded PTFE/Silicone Septa, 100/pk. Sciencix Part #: 11-3552. 11-3552.jpg.

WHEATON® Caps for Screw Thread Vials, Preassembled Open Top Caps and Septa, Black PP Cap With PTFE / Silicone / PTFE, 10-425, Case of 100.

Items 1 - 50 of 204 Properties and applications of septa made of TEF, PTFE, butyl, silicone etc. ; Application: HPLC ; Very inert, therefore also as a coating on ...

V9014, 9mm Diameter, Vial+Cap+Septa, Clear, No Cap Hole, Write-on Spot, 12x32mm Diameter, 1.5/2mL, Screw Cap, PTFE/ Silicone Septa, Wide Opening, 100pc/ea.

Attached polypropylene hole caps are known for good impact strength, cost effectiveness, and pliability. The PTFE PTFE/Silicone septa resists coring and is 

Blue polypropylene short screw-thread cap, 6mm center hole, 9mm diameter, with pre-slit red PTFE/white silicone septa, 100/pk, CV1815.