Blue polypropylene cap, bonded PTFE/silicone septa 100/pk 5185-5823 Blue polypropylene cap, bonded pre-slit PTFE/silicone septa 100/pk 5185-5824 Polypropylene Screw Caps (no septa) Blue, open top 100/pk 5182-0728 Green, open top 100/pk 5182-0727 Red, open top 100/pk 5182-0726 Blue PTFE-lined solid top (for storage) 100/pk 5183-2075 Septa for

Syringes for Manual HPLC Valves; Blue screw cap,P/sil pre-slit bond septa ... Cap, screw, blue, certified, bonded preslit PTFE/silicone septa, 100/pk. Cap size ...

Aijiren's extensive of range of 2 mL screw top vials to protect your sample from destabilizing or leaching. The associated 9 mm vial screw caps is available with your choice of cap septa constructed from various materials. Find the right screw vial for your non-volatile-based applications.

All products are tested in our fully equipped on-site laboratory Products Overview 8mm Screw Cap Liner: Assembled/Bonded PTFE/Silicone (Any color) 8mm Crimp Liner: Assembled PTFE/Silicone (Any color) 9mm Screw Cap Liner: Assembled/Bonded PTFE/Silicone (Any color) 10mm Screw Cap Liner: Assembled/Bonded PTFE/Silicone (Any color) 11mm Snap Cap

Screw Caps Vials With Septa at Thomas Scientific. You may choose from bonded PTFE/Silicone or bonded PTFE/Silicone with slit septa. Our sealed and re-closeable container includes: 100 - Certified 2.0mL screw thread vials 100 - 9mm royal blue closures with bonded septa Certificate. Get Price.

Jul 23, 2020 · In HPLC analysis, Septa is usually placed in the Cap of the HPLC Vial to seal the HPLC Vial to ensure that there is no gap between the Cap and the Vial.Aijiren's Septa uses a double-sided material, and the combination of PTFE and Silicone makes Septa not easy to deform.

Jun 4, 2021 · Characteristics Caps and septa are boned together using a mechanical way without any adhesives or chemicals. No glue contamination. Prevent liner fallout. Available in 1-3mm septa thickness. Suitable for medical devices, diagnostic packaging and specialty chemicals. Chromatogram With methanol soaked for 1 hour in septa

Screw cap (open-top) MilliporeSigma These hole caps do not come with septa. Application: It may be used in HPLC analysis, for quantifying adsorption of the three cationic membrane-active peptides mastoparan X, melittin, and magainin 2. Related Products: Hplc Caps Compare this item

1. Caps bonded with septa perfectly . 2. Caps and septa are pre-assembled to reduce contamination during sample preparation. 3. Bonded caps and septa are widely used in pharmaceutical field. 4. Aijiren Bonded cap and septa get the nice feedback from customers in USA, Europe, India, South Korea, South Africa, etc. 5. The testing report is

2in1 KIT, Vials with polypropylene screw cap and septum, pkg of 100, volume 4 mL 14.7 mm × 45 mm Expand 27562-U ABC Vial ™, 0.3 mL LVI ™, 9 mm thread, Pk/100, clear glass vial (vial only), cap (none supplied) 12 mm × 32 mm × 6 mm Expand 27329 ABC Vial ™, 2 mL (vial only), 9 mm thread, clear glass vial, pkg of 100 ea 12 mm × 32 mm × 6 mm Expand

Polyethylene (PE) septa and integral molded closures Chemically resistant polyethylene septa are molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are intended for single injection use with aqueous based sample mixtures.

Prevent septa push through and over- and under-tightening. With Advanced Vial Closure System (AVCS) technology built into 9 mm Aijiren Tech™ 9 mm Autosampler Vial Screw Caps and Septa you will get an optimal, consistent seal every time. With just one turn, they offer easy-on, easy-off convenience, and are a cost effective alternative to

Aijiren Technologies. screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top screw caps with the 8 mm septa installed. Septa for 8-425. Compare this item.

9mm screw thread cap, black polypropylene, silicone/PTFE septa, slitted, 60 shore, 1.0mm thick, 100/pack: Color: Black: Material: Polypropylene: Septum: Silicone/PTFE, Slitted: Thickness (Metric) 1.0 mm: Type: Screw: Closure Size: 9 mm: For Use With (Equipment) 9 mm Glass Screw Top Vials (Routine Range) Unit Size: Pack of 100

5190-7024 | Aijiren 2 mL Screw Top Vials & Caps Part Number: 5190-7024 Screw cap, bonded, blue, PFTE/red silicone septa, 100/pk. Cap size: 12 mm Add to Favorites Subscribe to this item in cart or checkout More lab efficiency with your auto delivery schedule, modify and cancel it at any time.