How Pierced PTFE/Silicone Septa Affect GC-MS Experiments The analysis of a sample generally involves a series of steps in which glassware and other sample ...
Silicone/PTFE septa will suffer less from this From my experience an unpunctured PTFE faced rubber septum, whether crimp sealed or screw ...
In 1966 we introduced our first liquid phase, the first silicone For column lengths that are not listed refer to Custom-made Glass Columns below.
Made from an enhanced injection-molded silicone rubber material, general purpose septa are used to maintain a leak-free seal under the septum nut in the GC
GC injection port septa for standard applications - sealing the injection port and improving the injecting of the sample.
Standard septa products are divided into five categories: autosampler, GC SSP can also create custom PTFE/silicone septa for your specific application.
C0000431 9-425 Blue PTFE/White Silicone Septa 1mm Thick PRE-SLIT. Red PTFE/White Silicone or customized ... Suitable for Many HPLC/GC Instruments.
Description: Septa for 8-425 screw thread caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications.
When it's time for sample injection, you can trust the PTFE/Silicone Septum from Aijiren Technology to help you perform that process successfully. Our septa are held to
Headspace (HS) coupled with gas chromatography (GC) provides quantitative and Currently, PTFE/silicone-based vial septa are widely used for headspace ...
Components on top of the injection port of GC systems that provide a leak-free seal between the atmosphere and carrier gas and minimize the introduction of
Ensure optimal performance of your GC instrument with bleed and temperature optimized Aijiren Tech™ BTO and TR-Green Septa. Made of low-bleed silicone,
Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in) thick. The average life of these septa is up to 100 injections with a
Reflect Scientific offers a variety of silicone based products that can be Cross slit; Laser drilled holes; GC injection port septa; Vial cap liners.
Custom septa from Specialty Silicone Products (SSP) are available for just about any application that requires analytical purity. Use our Custom Septa
