make PTFE/silicone septa suitable for all types of chromatographic applications. A thin film of PTFE is laminated to the side of the septum that faces the sample to limit exposure of the elastomer to the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical.
urea resin. Materials commonly used for septa include PTFE, silicone, natural red rubber, butyl rubber, Viton, polypropylene and polyethylene. PTFE is often laminated onto the sample facing side of a resealable septum to improve solvent exposure characteristics. Laminated septa will generally exhibit greater chemical resistance
Here we describe a case where the type of Hplc Vials And Caps used results in an interesting phosphorous pseudorotation driven by the mild alkalinity of glass. Vial Thread: Screw Cap: Plastic open/solid cap Septa: Non-slit, Pre-Slit, PTFE/Silicone Vial Dimension: 12x32mm Vial Color: Amber and Clear Vial Volume: 1.5-2.0ml
PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/Silicone Septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.
Choosing the correct septum material is vital, as it will interact with the analyte in your sample matrix as well as the sampler needle. Septa can be made from a range of materials including PTFE, silicone, red rubber, luoroelastomers, and butyl to name. few.
228-21287-91. Description: 4mL vial kit,4-SV 100/PCT. Learn More. Showing 1 to 30 of 32. 1. 2. ShopShimadzu, your online analytical consumables store based in Singapore. Visit our website and register to get the latest offers and product updates!
The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw. 2ml clear snap top hplc vials for sale. Tel: 008618057059123.
PTFE/Silicone Septa: (T/S) High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical.
A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.
the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.
Oct 21, 2022 · Oct. 21st, 2022. The septa and vial caps are essential parts of HPLC vials. The vial cap serves as a barrier, keeping outside contaminants out of the vial and preserving the integrity of the sample. The septa, a seal between the injection needle and the vial composed of silicone, PTFE, or rubber, ensure accurate and exact sample injection.
Content. Aijiren produces matching Closures for HPLC Vials, especially Septa, which is made of Silicone and PTFE. Septa can ensure that the hplc vials are sealed. At the same time, it must ensure that the automatic injection needle can penetrate into the interior of Vias for sampling, so for Septa There are certain requirements for the thickness.
Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick . Compare this item.
The slit allows ambient gas to equalize the gas in the vial so that a vacuum is not created in the vial from the tight seal around the needle. If coring or clogging from a narrow needle or needle deflection from highly durable septa material is a concern, then choosing a pre-slit septum is a better choice.
