PTFE/Silicone Septa: (T/S) High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical.
Description. Pricing. Details. black polypropylene, septum (TEF/red rubber), septum thickness 1.3 mm, 8-425 thread. Expand. Hide. 854987. black polypropylene hole cap, thread for 13-425, PTFE/red rubber septum, for use with 4 mL vials with 13-425 thread, pkg of 100 ea. Expand.
Injection molding of liquid silicone rubber (LSR) is often the preferred choice of producers of rubber parts. That is because LSRs offer better end-product performance, and the injection molding technique offers high levels of automation and almost 24/7 production. LSRs also are ideal for rubber parts in
SureStop vials with AVCS caps. 4, 8, 12, 16, 20, or 40 mL vial-cap kits. 20 mL screw top vials with 24 mm caps. 20 mL screw top headspace vials with 18 mm caps. Innovative technology ensures proper vial-cap seal every time. For use with environmental analyses under EPA regulations. For use with scintillation assays.
Large rubber septa may be used to cap female joints. However, the use of 6-mm septa and 9-mm o.d./6-mm i.d. medium-wall glass septum inlets is preferred. The small rubber septum provides a more positive reseal after puncture and allows less rubber to be in contact with organic vapors in the reaction vessel.
Ace Glass. Specially engineered to fit standard taper joints and tubes. Manufactured under white room conditions for extreme cleanliness. Made of a more dense rubber, low extractables and a better fit (50% to 80% on joints) these septa are much less likely to fail in the presence of solvents. Compare this item.
Generally, silicone septa are more easily pierced than red rubber or butyl septa. For thicker, hard-to-pierce septa, a small gauge (23 gauge) needle may be required, or a stronger S-needle can be used. Preslit septa are the best option for easy penetration, reducing the likelihood of coring.
Save time and improve productivity with Liquid silicone rubber. Formulated for process performance, evaluated for food contact, drinking water and infant care applications. Low temperature, fast-cure elastomer perfect for over molding of low-melting point plastics and thermally sensitive components. SILASTIC™ liquid silicone rubbers (LSR) are
Add to Compare. Kinesis – Item # EW-98706-03. Choose the right septum for optimal performance and results. Various materials, thicknesses and hardnessess to suit your application. Pre-slit septa prevent a vacuum forming inside the vial. Natural PTFE/clear silicone, 15 mm dia. MORE +.
Products. Septa. By definition, a rubber septum consists of a disk of rubber or similar material used to seal a vial or other device. It is installed along the inside of a cap, which is typically made of metal or plastic. A syringe needle pierces the rubber septum for the purpose of injection and, on withdrawal, the elasticity of the septum
Ideal for use with open-top caps to access container contents with a syringe.Septa are available in a variety of materials and thicknesses. PTFE Natural Rubber are moderately priced seals for GC and HPLC with good chemical properties. They are ideal for multiple injections due to high resealability, but not as easy to penetrate as PTFE/RR. PTFE/High Performance Rubber is a highly pure
Silicone rubber septa. High quality, silicone rubber laminated to PTFE. Use when excellent resealing qualities are a must. Septum resists coring and is recommended when multiple injections are required. Preferred septa for use in liquid chromatography applications.
The silicone elastomer layer is dense but still easily pierced by most headspace sampling needles. Black rubber septa Black Rubber septa are molded from a higher density rubber compound compared to the standard red rubber. This septum has characteristics similar to the gray butyl stopper. The Black rubber septum is an economical choice for
Liquid rubber is a common filler introduced to epoxy resin to improve its toughness for electrical insulation and electronic packaging applications. The improvement of toughness by adding liquid rubber to epoxy resin leads to the variation of its dielectric properties and relaxation behaviors and it has not been systematically studied yet.
.jpg)
