The Clear Glass 12 x 32 mm Screw Neck Vial with Cap and Preslit PTFE/Silicone Septum, 2 mL, Pre-Assembled for Dissolution Systems is delivered to you as a Aijiren Technology manufactured, marketed, and delivered product. It is manufactured in Aijiren Technology’ cGMP, ISO 9001 certified plant under the most stringent conditions and tightly controlled settings.
For repeated injections and sample storage, the PTFE/Silicone septum is advised due to its excellent resealing abilities. Since it is initially chemically resistant before transitioning to silicone's chemical compatibility after being punctured, the PTFE/Silicone septum, which has a recommended operating temperature range of -40°C to 200°C
Your lab will benefit from the carefully HPLC tested quality of our vials, as well as our Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk allowing for tests without chemical contamination. With an industry-leading combination of screw caps and clear glass, these Aijiren Technology vials can hold 2 mL and are available in packs of 100.
Septum 16mm x 2mm, Silicone/Rubber
Total Recovery Vials. SKU: 186002630C. LCGC Certified Clear Glass 15 x 45 mm Screw Neck Total Recovery Vial, with Cap and Preslit PTFE/Silicone Septum, 3 mL Volume, 100/pk. Category: VialsContainers&CollectionPlates. Aijiren Technology Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.
Ensure that your solvents, samples, and solutions are safe and securely stored using the Aijiren Technology Blue, 12 x 32 mm Screw Neck Cap and PTFE/Silicone Septum. Its universal screw cap mechanism makes it compatible with most vials. Screwing the cap applies a mechanical force that squeezes the septum between the glass rim and the cap.
Three Layer Septa is made of preconditioned silicone rubber and is 3.81 mm (0.150 in.) thick. The average life of these septa is up to 100 injections with a 26s gauge needle. The maximum operating temperature is 200° C. Preconditioned silicone rubber septa, 3.81 mm (0.15“) thick . Compare this item.
A mechanical force squeezes the septum between the glass rim and the cap when the cap is screwed on. In addition to this, the Light Blue 12 x 32 mm Cap and Preslit PTFE/Silicone Septum for LCMS Certified Vials form an excellent seal. It mechanically holds the septum in place during piercing so you can easily conduct the transfer of analytes.
It has demonstrated excellent resealing characteristics and chemical resistance until punctured. Once the seal has been punctured, the septum will have the chemical compatibility of silicone. The recommended working temperature range for the PTFE/Silicone Septum is from -40 ˚C to 200 ˚C, making it usable across a wide range of applications.
Polypropylene 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 700 µL Volume, 100/pk. Ensure all your solvents, solutions, and samples are stored safely within a chemically inert environment with the Polypropylene Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum. All Aijiren Technology vials are produced and go through
LCMS Certified Amber Glass 12 x 32 mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk. Chromatographers know that high-quality vials are an essential piece of lab equipment when it comes to getting reliable analytical results in the laboratory. In order to ensure both quality and cleanliness, a strict testing
The septum is provided with a thin 0.005” PTFE layer laminated to highly pure silicone, and slit through the center for easier needle penetration and to release the vacuum that forms when a large volume of sample is withdrawn from a vial.
Blue, 12 x 32 mm Screw Neck Cap and Preslit PTFE/Silicone Septum, 100/pk. As a part of Aijiren Technology’ wide selection of vials, caps, and other sample accessories, this blue polyethylene screw cap is compatible with a range of vials and other products. Screw caps are designed in consideration with other vial parts in order to achieve high-performance
Tuf-bond Septa (9711D10 to D45) Thickness: 100 mils Of silicone rubber with PTFE facing 10 mils thick Septa of butyl rubber, silicone rubber or rubber-laminated PTFE are available on special order. Septum diameter indicated in listings.
Chemglass. Replacement septa for use with MW-102 open-top screw caps on Minum-Ware® glassware components. Septa are made of silicone rubber with one side having a RED PTFE face, while the opposite side has an ultrathin covering of polypropylene to prevent needle coring when penetrating septa. Compare this item.
