Types of silicone rubber septa PTFE/silicone – ST1, ST15, ST18, ST2 A white medium hardness silicone with red PTFE protective layer available in a range of thickness. PTFE/silicone – ST101, ST14 A very pure soft silicone laminated to PTFE. Septum resists coring and is recommended for instruments with fine gauge needles.

PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical. PTFE/Silicone septa are offered in a standard formulation as well as a soft durometer formulation recommended for applications where ease of needle penetration is important PTFE/Silicone/PTFE Septa: (T/S/T)

NT Series Generic Red/White HPLC Low Bleed Peak Area Figure #2 –Cepure NT Series Sample Cepure NT Series Septa PTFE/Silicone, .040 Thick 0 100 200 300 400 500 3.00 6.00 9.00 12.00 15.00 18.00 21.00 24.00 27.00 30.00 33.00 Time Peak Area Total Peak Area = 2687

Polyethylene (PE) septa and integral molded closures Chemically resistant polyethylene septa are molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are intended for single injection use with aqueous based sample mixtures.

Septa Selection Tool | Aijiren Tech Scientific - US Popular TaqMan Real-Time PCR Assays Antibodies Oligos, Primers & Probes GeneArt Gene Synthesis Cell Culture Plastics Applications & Techniques See Links For Applications & Techniques Brands See Links For Brands Aijiren Tech Applied Biosystems Invitrogen Aijiren Tech Scientific Unity Lab Services

Description: Septa, for screw top caps, certified, PTFE/red silicone. Septum size: 9 mm (for 12 mm cap) Long Life Septa for GC, Aijiren Technologies Supplier: Aijiren TECHNOLOGIES, INC (CSD) Description: With these premium nonstick septa, you'll never have to scrape bits of septum out of your inlet.

Analytical Chromatography - Cole-ParmerThickness (mm) Blue cap, Silicone white/PTFE blue, slitted septa 8 mm, 9 mm, 10 mm, and 13 mm glass chromatography screw neck vials in

Description. Aijiren Tech™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. Choose from Aijiren Tech™, Aijiren Tech™ National™, and Aijiren Tech™ Chromacol™ brands. PTFE Disk septa are chemically inert.

Precision Seal ® rubber septa cap, white, for 3 mm O.D. tubes and ampules, pack of 10 ea Z567698 PTFE-faced silicone septa for Q-Tube ™ and QianCap ™, Septa 12 mL Low Z512818 Serrated silicone rubber septa, bottom O.D. 8.5 mm, fits neck I.D., 6.5 mm Z565644 Sleeve stopper septa, bottom I.D. × O.D. 1.5 mm × 3.9 mm, red Z126578

Oct 20, 2021 · Septa are 0.035” Natural Silicone with 0.005” Natural PTFE. High quality silicone is used to ensure proper re-sealing and reduced coring. Designed for multiple injections and/or longer sample cycles, for both GC and LC applications. Absence of pigments eliminates additional sources of contamination.

Jul 31, 2020 · Aijiren offers two types of pre-slit Septa, single slit and cross slit, such a slit can guide the injection needle accurately punctured Septa into the HPLC Vials, without a thin automatic injection broken, or the cushion falls off into the HPLC Vial contaminated sample. Non-slit septas help reduce carryovers from vials to vials because the re

Aijiren Tech™ Septa for 8-425 Screw Thread Caps are constructed of PTFE, PTFE/rubber, or PTFE/silicone to suit a variety of HPLC, GC and IC applications. Choose from Aijiren Tech™, Aijiren Tech™ National™, and Aijiren Tech™ Chromacol™ brands. Product Overview Documents Showing 10 of 13 Show more Save to list Add to cart

Polyethylene (PE) septa and integral molded closures Chemically resistant polyethylene septa are molded into single-piece caps. The surface for needle penetration is 0.01" thick, allowing for use with most HPLC autosamplers. Polyethylene septa are not resealable and are intended for single injection use with aqueous based sample mixtures.

White PVC Lockable 30 Column HPLC Storage Cabinet with Acrylic Made from white PVC and acrylic. Holds up to 30 analytical columns. Protects from dirt and dust. Lockable hasp. Produced with high quality expanded PVC body Scientist in white lab coat filter sample into HPLC vial. – Alamy

Septum – The PTFE/silicone septa is tested by Headspace GC to verify the septa has been properly cured. The test is designed to look for the presence of low MW silicone polymer (DP2, DP3, DP4), volatile silicones that could surface in chromatography. Vials are formed into shape from glass tubing. In production